Hardware

An analog phone needs a line that supplies about 48 V and a ringing voltage. A laptop’s USB port can’t do that, so the cheapest reliable bridge is an ATA (analog telephone adapter) with an FXS port. It speaks SIP on one side and drives the phone on the other.

Option Approx. cost Notes
Grandstream HT801 v2 + USB-C Ethernet adapter €35–45 + €10–15 Recommended, and what these docs use. Has its own power supply and plugs straight into the laptop.
Cisco/Linksys SPA112 (used) €15–30 Two FXS ports. Discontinued but common secondhand.
Old FRITZ!Box with an FXS port (7490, 7530, …) €20–30 used Works as an ATA if you register it as a SIP client. Fiddlier to set up.
DIY: AG1171 SLIC + CM108 USB sound card + RP2040 ~€20 Truly USB-only, but needs its own hook and ring driver instead of Asterisk. Not supported here.

Any corded analog phone works. The project was built with a Profoon TX-155.

Wiring: phone → ATA Phone port (RJ11). ATA Internet port → USB Ethernet adapter → Mac. The whole setup travels with the laptop.

If your Mac already uses a USB or dock Ethernet adapter for its own network, both adapters may show up in macOS with the same name. Keep track of which one the ATA is on (see Phone setup).


MIT licensed. Not affiliated with Anthropic.